SPC Performance

SPC Performance

SPC Performance 81280 - EZ Cam XR Bolts (Pair) (Replaces 16mm Bolts)

SPC Performance - 81280Camber Bolt - EZ Cam XR - 16 mm Replacement Bolts - Steel - Gray Chromate - PairFOR DOMESTIC/IMPORT-TWO BOLT STRUTS. EZ Cams make non-adjustable two-bolt struts adjustable up...

SPC Performance

SPC Performance 74940 - 12x8mm Slot Punch Tool

SPC Performance - 7494012 X 8mm SLOT PUNCHTurn any 1/2" [12mm] hole into a precise and clean 8mm slot in your subframe clevis or axle brackets. The tool is designed to cut up to 10 ga mild steel. The...

SPC Performance

SPC Performance 77880 - FORD OE SLEEVE PULLER

SPC Performance - 77880FORD OE SLEEVE PULLERThis sleeve puller will pull both O.E. and most aftermarket camber/caster sleeves quickly and efficiently, usually without damaging the ears of the sleeve...

SPC Performance

SPC Performance 80599 - BREAK AWAY AXLE SHIMS(6)

SPC Performance - 80599ZINC AXLE SHIMS 2 1/2 DEG. (6)These heavy-duty axle caster shims can also be used to adjust pinion angle on Jeep CJs and similar vehicles with 1-3/4" to 2" wide leaf springs...

SPC Performance

SPC Performance 81250 - EZ Cam XR Bolts (Pair) (Replaces 12mm Bolts)

SPC Performance - 81250Camber Bolt - EZ Cam XR - 12 mm Replacement Bolts - Steel - Gray Chromate - PairFOR DOMESTIC/IMPORT-TWO BOLT STRUTS. EZ Cams make non- adjustable two-bolt struts adjustable up...

SPC Performance

SPC Performance 74910 - CAM KNOCKOUT OUT PUNCH

SPC Performance - 74910CAM KNOCKOUT PUNCHA necessary tool for removing the alignment inserts on the upper control arm alignment brackets without damaging the bracket. Includes a center punch for the...

SPC Performance

SPC Performance 75555 - TORQUE EXT 140 LB-FT

SPC Performance - 75555TORQUE EXT (AQUA) 140 FT LBSHeavy duty aqua extension for 140 ft. lbs. torque. 1/2" drive compliments 75500 set. California Residents WARNINGAdd-On: 75585, 75560, 70050

SPC Performance

SPC Performance 74914 - OFFSET PUNCH STUD-74910

SPC Performance - 74914OFFSET PUNCH STUD (74910)Replacement offset punch stud for 74910 tool. California Residents WARNING

SPC Performance

SPC Performance 81351 - 98-08 Audi A4/S4/RS4 / 98-05 VW Passat Front Upper Multi Control Arm - Left

SPC Performance - 81351UCA'S AUDI AND VW - LEFTAdjust front camber and caster +-1.5deg on the Audi B5/B6/B7 and C5 platforms with these forged aluminum adjustable control arms from SPC. OE style...

SPC Performance

SPC Performance 80799 - BREAK AWAY AXLE SHIMS(6)

SPC Performance - 80799ZINC AXLE SHIMS 3 1/2 DEG. (6)These heavy-duty caster axle shims can also be used to adjust pinion angle on Jeep CJs and similar vehicles with 1-3/4" to 2" wide leaf springs...

SPC Performance

SPC Performance 77350 - HEAVY DUTY TIE ROD TOOL

SPC Performance - 77350FORD SUPER DUTY TIE ROD TOOLThis tool is specifically designed for use on the Ford Super duty trucks as well as most other light trucks and vans as well. The extra long bar...

SPC Performance

SPC Performance 73150 - HD Lo-Profile Pitman Popper

SPC Performance - 73150HD LOW-PROFILE PITMAN POPPERSave time and money on pitman arm removal jobs with this heavy duty low-profile pitman arm puller tool. Made with forged steel jaws, the low profile...

SPC Performance

SPC Performance 80499 - BREAK AWAY AXLE SHIMS(6)

SPC Performance - 80499ZINC AXLE SHIMS 2 DEG. (6)These heavy-duty axle caster shims can also be used to adjust pinion angle on Jeep CJs and similar vehicles with 1-3/4" to 2" wide leaf springs. 2...

SPC Performance

SPC Performance 74500 - 1-1/4in. BOX END WRENCH

SPC Performance - 745001-1/4" BOX END WRENCHThese wrenches make presetting our adjustable truck sleeves (24160,24180,24120,24130) easier for the installer. California Residents WARNINGCase Included:...

SPC Performance

SPC Performance 80210 - CARBIDE INSERTS-KWIK WAY

SPC Performance - 80210CARBIDE INSERTS-KWIK WAY (10)For Rels Model SW504 Swing Arm- Rels Part # SW4236-15---- For Snap-On Models YA180,YA281---- 3 cut edges----positive rake for rotor & drum 10 bits...

SPC Performance

SPC Performance 81240 - EZ Cam XR Bolts (Pair) (Replaces 10mm Bolts)

SPC Performance - 81240Camber Bolt - EZ Cam XR - 10 mm Replacement Bolts - Steel - Gray Chromate - PairFOR DOMESTIC/IMPORT-TWO BOLT STRUTS. EZ Cams make non-adjustable two-bolt struts adjustable up...

SPC Performance

SPC Performance 80699 - BREAK AWAY AXLE SHIMS(6)

SPC Performance - 80699ZINC AXLE SHIMS 3 DEG. (6)These heavy-duty axle caster shims can also be used to adjust pinion angle on Jeep CJs and similar vehicles with 1-3/4" to 2" wide leaf springs. 3...

SPC Performance

SPC Performance 81139 - MAGNET ADJ CAMBER GAUGE

SPC Performance - 81139Caster / Camber Gauge - Analog - Magnetic Adapter - Steel - Black Paint - EachThe 81139 is inexpensive, portable, and very accurate. It has a simple leveling adjustment of...

SPC Performance

SPC Performance 73005 - G37/370Z Adj Control Arms

SPC Performance - 73005G37/370Z ADJ CONTROL ARMSThis pair of patent pending adjustable front upper control arms will give +-4deg camber and +-4deg caster change. SPC arms match the OE design for...

SPC Performance

SPC Performance 80206 - CARBIDE INSERTS-KWIK-WAY

SPC Performance - 80206CARBIDE INSERTS-KWIK-WAY (6)For Kwik Way Models SDL,DL,850 Disc Lathe,NDL,BDL,CBL----- Kwi-Lathe On-The-Car #108-0005-04 ROTUNDA,LINE-O-TRONICS---- Kwik-Way part#...

SPC Performance

SPC Performance 73119 - PITMAN ARM PULLER

SPC Performance - 73119PITMAN ARM PULLERDesigned to handle the toughest job,the 73119 is adjustable and has special forged jaws shaped to fit the job. Positive grip allows this tool to do many other...

SPC Performance

SPC Performance 75400 - EZ Shim Dual Angle Camber/Toe Shim (Grey)

SPC Performance - 75400DUAL ANGLE SHIM (GREY)A patented Full Contact Dual Angle Shim, that corrects Toe and Camber with one shim. These two-piece adjustable shims are available in 4 sizes which cover...