Unisteer 8011650-01 - 67-72 GM C10 Power Rack and Pinion Kit

Unisteer 8011650-01 - 67-72 GM C10 Power Rack and Pinion Kit

Rack and Pinion - Power - Aluminum - Black Powder Coat - Disc Brake Spindles - 2WD - GM Fullsize Truck 1967-72 - Kit

Rack and Pinion - Power - 1967-72 Chevy C10 - w/Disc Brakes

Revitalize your old C-10 with our Bolt On rack & Pinion kit – great steering and handling - no bump steer. Put the old steering box out to pasture – not your Truck!

• On this kit we used a traditional style rear steer rack & pinion that is mounted to a one piece bracket which bolts up to the outside of either frame rail in the same holes as the original steering box and idler arms.
• This kit is for rear-wheel-drive vehicles only, NOT 4x4s. Installs have been done on V-8s, so there should be room if using a 6 Cylinder.
• There is quite a bit of room for the shaft support, but some headers may require modification. A two-groove pulley on your water pump is required for this kit.
• Note: If using drum brake spindles order kit 8011900-01.