Unisteer 8010740-01 - Power Rack & Pinion - 68-72 Chevelle

Unisteer 8010740-01 - Power Rack & Pinion - 68-72 Chevelle

Rack and Pinion - Power - Aluminum - Black Powder Coat - GM A-Body 1968-72 - Kit

Rack and Pinion - Power - 1968-72 GM A-Body - 396-454 - Long Water Pump-Big Block

Detroit was making muscle during these years – but they missed the boat on steering! Fix it by bolting on one of our Rack & Pinion Kits! Make your car handle as good as it looks!

• We used a front steer center take off style rack and pinion on a one piece bracket that bolts up in the same location as the original steering box and idler arm.
• This kit does clear the Z-Bar and 4 Speed Linkage. We have installed this kit on cars with both big block and small block motors.
• On the Big Block, stock manifolds and Super Comp Headers work, and on the Small Block motor Hooker Comp Headers work. Other headers may work, but may need modification.
• The kit is set up to go on cars with either small blocks or big blocks with long water pumps. If you have a short water pump, we can easily accommodate, but you will need to call us, and we'll swap in the proper components.
• Note: Some aftermarket cylinder heads may have a raised exhaust floor anywhere from 0.25" - 0.4" which may also affect your header location.
• Note: This kit will also bolt into a 1968-72 small block El Camino and Monte Carlo.
• Big block motors:The original Mart IV design has a deck height of 9.8", the Mark V and Mark VI designs have a deck height of 10.2". The 0.4" difference affects clearance on these big block cars.
• Mark V and Mark VI designed cars will probably need more header modification.