SPC Performance - 23108
2deg FORD CAM/CAS SLEEVE
Change camber,caster, or both on twin traction beam Dana 44s with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve. Unstall zero degree sleeve 23109 to determine the change needed, then install the correct sleeve. To split camber and caster adjustment, rotate sleeve 45deg. California Residents WARNING
- Easily change caster,camber or both at the same time with sprocket style sleeves
- Clear Zinc coating for corrosion resistance
- Part #23108 2.00 degree (2 degree)
- Recommended Tools: 77880 - Sleeve Puller, 88830 - Sleeve Puller
Add-On: 77880, 23100, 23101, 23102, 23103, 23104, 23105, 23106, 23107, 23109, 23110, 23111, 23112, 23113, 24130
