Quick Time RM-193 - QuickTime Transmission Spacer - T-56 Magnum - 3/8" Aluminum

Quick Time RM-193 - QuickTime Transmission Spacer - T-56 Magnum - 3/8" Aluminum

QuickTime Transmission Spacer - T-56 Magnum - 3/8" Aluminum

Fits Between Bellhousing and Transmission to Adjust for Input Shaft Length or Provide Additional Space

-Do not move or disturb the press-in oil plug deep inside the crankshaft flange. -Do not use a hydraulic method to push-out or remove the old pilot bearing. -Be sure to install the new pilot bearing into the crankshaft by driving or pressing on the outermost part of the bearing only. The bearing must be straight and fully seated into the crankshaft. Do not force the installation.

• Spacer will properly space your bellhousing from your transmission
• Made from laser cut aluminum
• 3/8 inch thick spacer