Heatshield Products - 274012
Hose and Wire Sleeve - Thermaflect Sleeve - 1/2 in ID - 3 ft - Hook and Loop Closure - Fiberglass - Silver - Each
Thermaflect Sleeve acts as a thermal barrier capable of reflecting up to 95 percent of radiant heat away (requires minimum of 1 inch of airspace). Use on your fuel lines, wiring looms, air intake, and air conditioning hoses to shield heat.
a 3 foot length our Thermaflect Sleeve weighs less than 6 inches of the old silicone covered stuff of the same diameter. Though it weighs much less, it offers superior radiant heat protection. Thermaflect Sleeve withstands 1100F of continuous radiant heat and 500F direct heat. Also available in sewn seam.
- Continuous operating reflective temperature of 1100F, 2000F intermittent
- Capable of reducing up to 90 percent of radiant heat
- Helps to prevent vapor lock, lower air intake temperatures, protects wires from melting
- hook & loop allows installation without component assembly
Color: Silver/Aluminum
Conductivity Warning: Caution this material is electrically conductive; be sure to insulate any terminals that might come in contact with this product.
Install Tips: Hook & loop seam
Instructions Included: No
Insulation Type: Radiant heat barrier, needs 1 inch of air space, should not contact heat source.
Manufacturer Product Link: https://www.heatshieldproducts.com/thermaflect-sleeve-hook-and-loop
Material: Proprietary Aluminized Fiberglass
Operating Temperature: 1100F
Peak Temperature: 2000F
Product Dimensions: 1/2 id x 3 ft H&L seam
Safety Equipment Warning: Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product.
