Tools

SPC Performance

SPC Performance 74910 - CAM KNOCKOUT OUT PUNCH

SPC Performance - 74910CAM KNOCKOUT PUNCHA necessary tool for removing the alignment inserts on the upper control arm alignment brackets without damaging the bracket. Includes a center punch for the older GM vehicles and the newer Jeep JK's and an offset...

SPC Performance

SPC Performance 75555 - TORQUE EXT 140 LB-FT

SPC Performance - 75555TORQUE EXT (AQUA) 140 FT LBSHeavy duty aqua extension for 140 ft. lbs. torque. 1/2" drive compliments 75500 set. California Residents WARNINGAdd-On: 75585, 75560, 70050

SPC Performance

SPC Performance 74914 - OFFSET PUNCH STUD-74910

SPC Performance - 74914OFFSET PUNCH STUD (74910)Replacement offset punch stud for 74910 tool. California Residents WARNING

SPC Performance

SPC Performance 77350 - HEAVY DUTY TIE ROD TOOL

SPC Performance - 77350FORD SUPER DUTY TIE ROD TOOLThis tool is specifically designed for use on the Ford Super duty trucks as well as most other light trucks and vans as well. The extra long bar gives you maximum leverage to loosen rusted sleeves...

SPC Performance

SPC Performance 73150 - HD Lo-Profile Pitman Popper

SPC Performance - 73150HD LOW-PROFILE PITMAN POPPERSave time and money on pitman arm removal jobs with this heavy duty low-profile pitman arm puller tool. Made with forged steel jaws, the low profile design removes the need to remove the steering box...

SPC Performance

SPC Performance 74500 - 1-1/4in. BOX END WRENCH

SPC Performance - 745001-1/4" BOX END WRENCHThese wrenches make presetting our adjustable truck sleeves (24160,24180,24120,24130) easier for the installer. California Residents WARNINGCase Included: NoMaterial: Steel

SPC Performance

SPC Performance 80210 - CARBIDE INSERTS-KWIK WAY

SPC Performance - 80210CARBIDE INSERTS-KWIK WAY (10)For Rels Model SW504 Swing Arm- Rels Part # SW4236-15---- For Snap-On Models YA180,YA281---- 3 cut edges----positive rake for rotor & drum 10 bits per pack. California Residents WARNINGPositive Or...

SPC Performance

SPC Performance 80206 - CARBIDE INSERTS-KWIK-WAY

SPC Performance - 80206CARBIDE INSERTS-KWIK-WAY (6)For Kwik Way Models SDL,DL,850 Disc Lathe,NDL,BDL,CBL----- Kwi-Lathe On-The-Car #108-0005-04 ROTUNDA,LINE-O-TRONICS---- Kwik-Way part# 109-1092-23---- Rels Model SW504 Swing Arm -Rels Part #...

SPC Performance

SPC Performance 73119 - PITMAN ARM PULLER

SPC Performance - 73119PITMAN ARM PULLERDesigned to handle the toughest job,the 73119 is adjustable and has special forged jaws shaped to fit the job. Positive grip allows this tool to do many other pulling jobs Jaws open up to 2 1/8". CAUTION : NOT FOR...

SPC Performance

SPC Performance 74600 - Adjustable Truck Sleeve Wrench

SPC Performance - 74600ADJUSTABLE TRUCK SLEEVE WRENCHSave time and trouble when installing SPC's adjustable truck sleeves by using this double sided wrench. This wrench is specifically designed to be used with our 24220 and 24230 sleeves and makes...

SPC Performance

SPC Performance 77928 - PEDAL DEPRESSOR

SPC Performance - 77928PEDAL DEPRESSORAn adjustable steel plate extends the length of the bar to put constant pressure on the brake pedal. CAUTION: Use only according to directions packaged with product. California Residents WARNINGAdd-On: 77938

SPC Performance

SPC Performance 81133 - MAGNET FOR 81139 GAUGE

SPC Performance - 81133MAGNET FOR 81139Replacement magnet for 81139 Camber gauge California Residents WARNINGAdd-On: 81139Color: BlackMaterial: Steel and MagnetStorage Case Included: No

SPC Performance

SPC Performance 81309 - HD WHEEL STRAIGHTENER

SPC Performance - 81309HD WHEEL RIM STRAIGHTENERFor quick and easy removal of indentations on wheel flanges and rims of most vehicles. Allows proper tire seating,giving greater tire protection and durability. This tool is powder coated for added...

SPC Performance

SPC Performance 79240 - FLIP SOCKET 19MM & 21MM

SPC Performance - 79240FLIP SOCKET 19MM & 21MMThis 1/2" square drive impact socket is deep and thin walled to reach areas conventional sockets can't reach. Each socket provides two sizes. California Residents WARNINGAdd-On: 79230

SPC Performance

SPC Performance 74915 - CENTER PUNCH STUD-74910

SPC Performance - 74915CENTER PUNCH STUD (74910)Replacement punch stud for 74910 California Residents WARNING

SPC Performance

SPC Performance 79230 - FLIP SOCKET 3/4in.&13/16in

SPC Performance - 79230FLIP SOCKET 3/4" & 13/16"This 1/2" square drive impact socket is deep and thin walled to reach areas conventional sockets can't reach. Each socket provides two sizes. California Residents WARNINGAdd-On: 79240

SPC Performance

SPC Performance 77938 - STEERING WHEEL HOLDER

SPC Performance - 77938STEERING WHEEL HOLDERA must for proper alignments. This tool securely holds the steering wheel and it's covered hooks & base prevent damage to the steering wheel and seat.----------------------------- CAUTION: This product is not a...

SPC Performance

SPC Performance 74400 - 1-1/2in. OPEN END WRENCH

SPC Performance - 744001-1/2" OPEN END WRENCHThese wrenches makes presetting our adjustable truck sleeves (24160,24180,24120,24130) easier for the installer. When using the 74400 wrench it is recommended that the opening be equally positioned over the...

SPC Performance

SPC Performance 75585 - TORQUE EXT 550 FT LBS

SPC Performance - 75585TORQUE EXT 550 FT LBSThis heavy duty 1" drive torque extension provides a fast, s imple method to achieve manufacturers' specified torque ever y time using an impact wrench. No more guesswork! This exten sion features solid one...

SPC Performance

SPC Performance 75580 - TORQUE EXT 400 FT LBS

SPC Performance - 75580TORQUE EXT 400 FT LBSThis heavy duty 1" drive torque extension provides a fast, s imple method to achieve manufacturers' specified torque ever y time using an impact wrench. No more guesswork! This exten sion features solid one...

SPC Performance

SPC Performance 71989 - TIE ROD TOOL

SPC Performance - 71989TIE ROD TOOLThese are tools needed to adjust toe on the new Ford Super Duty Pickups. With 1/2" drives. California Residents WARNINGAdd-On: 71909, 71959, 71969, 71979, 71999Color: BlackDiameter: 1.4375Double Ended Use: NoLength: 4...

SPC Performance

SPC Performance 71909 - TIE ROD TOOL SET-5PC

SPC Performance - 71909TIE ROD TOOL SET-5PCThis kit includes part numbers 71959 through 71999. It will allow adjustment of most cars and light trucks and also includes the two larger adjusting tools needed for the new Ford Super Duty pickups. Tools have...

SPC Performance

SPC Performance 72045 - 05-10 Ford Mustang (V6/V8)Black Anodized Adjustable Panhard Bar

SPC Performance - 72045MUSTANG PANHARD BARSPC aluminum panhard bars provide weight savings and adjustability! Manufactured from aircraft grade aluminum, precision TIG welded, and then black anodized, the SPC panhard bar is the lightest durable unit on...

SPC Performance

SPC Performance 72120 - Spanner Wrench 3/8in Drive

SPC Performance - 72120SPANNER WRENCH - 3/8" DRIVEThis tool is a must when servicing rebuildable ball joints from SPC. The 30mm spanner wrench has 5mm pins and is specifically designed for SPC's p/n 72610 Porsche arms and Builder Series of ball joints...